Project Nr 7, Tilt Out Garbage Bin, Part 3

Due to a flat tyre, I was stuck home today... and the weather is fine! So Finish of the bin ;-)
First thing today is assembling the front panel. Using the new ryobi combo saw, miter cuts are made easy. Need some excercise though...

So, that will fit just tight. Now the boards to make a nice front panel. Hope it will all be flush and right...

                                   

It fits! tight, almost flush, and almost right... but hey, that's part of the concept of building with pallet wood I guess.
Installing the hinges, and screwing on a bottom-panel as a support for the garbagebag. Forgot to take detailed pictures of that part... I also mounted a little handle to hang the bag on.

                                  

Nice! First time ever to build a cabinet like sturcture. Not to bad at all. Need to improve my skills a litlle more to more precise. But it's all a very good learning process ;-)
Finishing off with woodlovers teak oil spray, to give it some protection and making the grain stand out some more.

The first layer dried in 5 minutes, so I gave a second one. Finishes off just nice.
And does it fit in my utility room? 

Flush with the existing cabinet!

A little help and approval from Wolf ;-)

Oh Yes! it fits and it works as well!